ARO (V4) : Simplified leader command for arrow, line break and optional text.

ATC : Arc to circle. Convert arc(s) to circle(s) by picking. Snaps ignored.
Continuous, exit with ESC.

BK : Break at intersection. Pick the intersection, then the line to break. 2D/3D.

CHS : Chamfer set. Gets size of chamfer x 45 degrees from user and draws chamfer.
The CHAMFER command inherits the size. 2D/3D.

CS : Clear snaps. Set OSMODE to zero.

DC : Draws duplicate diameters at any screen position.
Continuous, exit with ESC.

DTX (2K) : Draws duplicate text at any screen position.
Continuous, exit with ESC.

DTX (V4) : Draws duplicate text at any screen position.
Continuous, exit with ESC.

ELA (V4 only) : Entity length adjust. Change length of line or arc
according to cursor position (no snaps). Continuous, exit with ESC.
2D/3D.

FS : Fillet set. Gets size of fillet from user and draws fillet.
The FILLET command inherits the size. 2D/3D.

GRN : Change all (simple) entities to green color.

IDE : Display entity list of (first) selected object.

INCA (V4 only) : Incremental angle. Draws a line from endpoint of
selected line at incremental angle.

IP : Set a point at the intersection (actual or implied) of two lines.

LAI (2K only) : Line angle increment. Draws a line from endpoint of
selected line at incremental angle.

LLA (2K only) : Line length adjust. Change length of line or arc
according to cursor position. Continuous, exit with ESC. 2D/3D.

NS : Normal snaps. Sets (or resets) to a standard set of snaps :
End of entity, center, node point, intersection.

RED : Change all (simple) entities to red color.

SI : Standard initialize. Sets a variety of system variables to
simplify working with imported files. Intended as an example only.
You will probably want to change many of the values.

SOC : Draw orthogonal square centered on selected point.
Continuous, exit with ESC.

SST : Standard start. Gets user input for orthogonal rectangle of any size.
Rectangle is composed of pairs of parallel lines, not a polyline.
Lower left corner is 0,0,0.

T (2K) : Text. A simplified TEXT command to enter a single line at any point.
Continuous, exit with ESC.

T (V4) : Text. A simplified TEXT command to enter a single line at any point.
Continuous, exit with ESC.

UPDTS : Update plain text (not dimension text) to new size. Does not
change sysvar TEXTSIZE.

WH : Change all (simple) entities to white color.

V1 : Set view to top (plan).

V2 : Set view to front.

V5 : Set view to right.

V7 : Set view to isometric.

V9 : Set view to axonometric.

ZB : Reduces image size by 20% (step back).

ZC : Zoom image to 20% less than full extents.

ZX : Zoom image to full extents.

Site Contents Are Copyright 2003, 2004 R.G. Mahoney     All Rights Reserved